Used to measure the light distribution curve, illuminance, light intensity data, beam angle, luminous flux and other parameters of small LED lamps (halogen lamps, cup lights, spotlights, bulbs, etc.)
The HP880 light intensity distribution tester is used to test the light distribution curve, light intensity data, beam angle, and equivalent luminous flux of small lamps such as LED spotlights and sem
GON2000 is ideally suited for analyzing the angle-dependent spatial radiation characteristics of large LED modules, solid-state lighting (SSL) products, and traditional lamps and luminaires.
HPG-1200 is a highly automated testing system. It can be widely used in traffic and automotive lamps and lanterns. The photometric performance test system adopts the internationally advanced CIE A-α m
HPG2000 is a C-type goniophotometer. It uses a reflector that moves in a circle around the center of the test lamp to reflect the light beam in the measurement direction of the lamp onto the photometr
HPG1900 is a type C goniophotometer. This system complies with the American Energy Star IES LM79 standard, European standard EN13032, GB/T9468 lamp distribution photometric test standard, etc.
HPG-1800 goniophotometer (single arm) used for testing the spatial photometric distribution (i.e. light distribution curve) of LED lamps (semiconductor lighting), road lamps, floodlights, indoor lamps
Welcome to Hopoocolor, a global leader in lighting optical detection built on innovation, collaboration and engineering excellence. HopooWhy Hopoo haveWithHopoo successfully developed a series of multi-functional optical testing equipmen …
Read More
Used to measure the light distribution curve, illuminance, light intensity data, beam angle, luminous flux and other parameters of small LED lamps (halogen lamps, cup lights, spotlights, bulbs, etc.) and single high-power LEDs.The instrument is designed with an optical dark box and light barrier
Read More
PAR METER ,PAR LIGHT METER, PPFD METER, PAR SPECTROMETER
Read More
HPCS-330UV Bluetooth spectral irradiance model, integrating spectrum, irradiance, and other parameters into one. The HPCS-330UV is a device specifically designed for measuring UVA, UVB, and UVC irradiance and wavelength. It uses a wireless Bluetooth connection
Read More
The SPCX-1200 spectral imaging luminance meter adoptsa specia measurement method
Read More
CX-1000 imaging luminance meter can be used for lighting research including LED lighting, street light road brightness testing, light environment testing, LED (LCD) display surface brightness analysis, etc. The test includes the brightness of any point on the image, the average value, maximum value,
Read More
CX-2600 is a high-precision imaging luminance meter independently developed by Hopoocolor. It uses SONY back-illuminated COMS sensor and two-stage TEC semiconductor refrigeration technology. It can work in a set constant temperature environment, thus greatly reducing the sensor cost.
Read More
HP-510 is a multifunctional digital power meter for measuring single-phase (1P/2W) AC/DC power supply. The testing bandwidth of this product can reach DC 0.5Hz~100kHz.
Read More
HPCS330 Wireless Spectral irradiance colorimeter, integrated spectrum, CCT, CRI, Lux, .etc parameters in one. With 3.5 inch touch screen, Real-time display of measurement parameters and curves, use convenient and fast.not only measure LED wide spectrum light source, but also measure CFL、HID narrow s
Read More
HPG2000 is a C-type goniophotometer, a moving mirror goniophotometer recommended by the American national standard NSI/IESLM-79-2019. The reflector that moves in a circle around the center of the test lamp reflects the light beam in the measurement direction of the lamp onto the photometric detector
Read More
According to CIE, IESNA, national standards and other requirements, the C-Y measurement method is realized by rotating the lamp.Used to measure the spatial light intensity distribution and various photometric parameters of various LED indoor lighting fixtures, floodlights, and road lighting fixture
Read More
The GMS-1000 glare measurement system adopts a high-precision imaging luminance meter. It is good to test UGR ,TI,GR , used in Indoor and outdoor light pollution test.The high-precision measurement and analysis of the unified glare index UGR is realized through a precision electronically controlled
Read More
HPCS-330IR is a device specifically designed for measuring the intensity and wavelength of light. It is used for red light therapy, infrared remote control emission tubes, infrared lasers, and others. It uses a wireless Bluetooth connection, spectrometer probe, and screen display separately.
Read More
We are committed to becoming a leader in optical measurement industry and a world-renowned brand.
We will continue to raise our horizon, look at the world, take the concept of global management as a guide, aim at leading international enterprises, constantly innovate, deepen reform, cultivate talents, and create a value chain of enterprises with global advantages.
ICP：浙ICP备15040053号-9 
